UT400 TC
The Utah-400/TC is a 64×64 router designed for transporting timecode data in conjunction with the audio/video signal routing layers of a Utah-400 digital routing switcher system. Each 3RU frame carries a single switch card that serves 64 input ports and output ports. A high speed data bus can be used to connect up to four Utah-400/TC frames to form larger routers with up to 256×256 ports. As with all other routers in the Utah-400 family, the Utah-400/TC comes standard with dual power supplies. The Utah-400/TC router is controlled by the same MX-Bus control system as other Utah-400 frames allowing it to be utilized with any SC-4 or SC-400 control system. The Utah-400/TC router’s I/O connections are carried on terminal strips for easy cabling using standard audio cable. The connector pin-outs follow the normal (+/-/Gnd) pattern for balanced three-conductor wiring. Unbalanced connections are also supported.
Find Your Sales Rep
Click on your area to see your sales representative’s contact information.
The Utah-400/TC is a 64×64 router designed for transporting timecode data in conjunction with the audio/video signal routing layers of a Utah-400 digital routing switcher system. Each 3RU frame carries a single switch card that serves 64 input ports and output ports. A high speed data bus can be used to connect up to four Utah-400/TC frames to form larger routers with up to 256×256 ports. As with all other routers in the Utah-400 family, the Utah-400/TC comes standard with dual power supplies. The Utah-400/TC router is controlled by the same MX-Bus control system as other Utah-400 frames allowing it to be utilized with any SC-4 or SC-400 control system. The Utah-400/TC router’s I/O connections are carried on terminal strips for easy cabling using standard audio cable. The connector pin-outs follow the normal (+/-/Gnd) pattern for balanced three-conductor wiring. Unbalanced connections are also supported.
3 Utah-400/TC Specifications
I/O Signals SMPTE 12M Timecode Data: 64 Ports
Signal Amplitude: 2.0Vpp +/- 10%
Input Impedance: 110 ohms
Output Source Impedance: <50 ohms
Power Requirements Input: 100-240 VAC, 50-60 Hz
Maximum Consumption: 50 W (All supplies are UL-listed and IEC950-approved)
Environmental Operating Temperature Range: 0-45° C
Relative Humidity: 0-90% (non-condensing)
Physical EIA: 19” rack-mount 2 RU (3.5” / 90 mm) x 14” (356 mm) deep
Weight: 15 lbs (7 Kg)