HUBbox NV120-T1310-R14
The HUBbox NV120-T1310-R14 Optical Fiber Converter provides one channel of 12G-SDI to Optical and one channel of Optical to 12G-SDI conversion. Designed for use with 12G-/6G-/3G-/HD-/SD-SDI. Supports data rates from 270Mbps to 11.88Gbps.
The HUBbox™ 12G is equipped with AutoSFP® functionality, similar to the XFD line. This makes the HUBbox™ 12G extremely flexible. Simply by replacing the SFP, it can easily be changed into a receiver or transmitter. We’ve also added dual BNCs per channel to the design, giving dual outputs or loopthrough.
The unit is housed in a compact and rugged aluminium case ideally suited to both studio and portable applications.
The HUBbox NV120-T1310-R14 is perfect for using with any XFD system where one or two signals are required remotely.
Find Your Sales Rep
Check the map below to see your sales representative’s contact information.
Chris Harmon
Northeast Regional Sales Manager
charmon@utsci.com
(801) 913-2512
Bob Pennington
Southeastern/Central Sales Manager
bpennington@utsci.com
(724) 880-0711
- AutoSFP® functionality
- Supports 4k and 8k UHDTV
- Dual output or loop-through with reclocked SDI
- Multi-rate reclocking with automatic rate detection and automatic bypass for non-SDI data rates
- Automatic Cable Equalization
- LEDs display power and SDI lock status
- Locking DC jack
- Optical LC/PC connector
- Delivered with 1310nm DFB laser and PIN receiver
- Typical Link lengths at 2.97Gbps:
- Up to 10km @ 9μm SMF
- Excellent performance with SDI-Checkfield test signal
- Use in conjunction with HUBbox™ NV30-T1310- R14-05 or the XFD system for a complete fiber transmit/receive system
General Operating Conditions
Operating temperature: -4 to +131°F (-20 to +55 °C)
Supply voltage (Vcc) 11 – 27 V
Dimensions: 2.5″ x 3.3″ x 1.2″ (63.5mm x 84mm x 30mm) (excluding connectors)
Weight 0.43 lb (200g)
Electrical Characteristics
Supported standards:
– SMPTE: 292M-2008, 259M-2008, 297M-2006, 424M-2006, ST 2082-1, ST 2081-1
– Laser safety: Class 1 21CFR and IEC60825-1
Number of IN/OUT BNCs: 2 (transmitter input or receiver output)
Number of OUT BNCs: 2 (transmitter loop-throuh or receiver output)
Typical input cable length equalization:
– Up to 50m of Belden 1694A @ 11.88Gbps
– Up to 140m of Belden 1694A @ 2.97Gbps
– Up to 200m of Belden 1694A @1.485Gbps
– Up to 400m of Belden 1694A @270Mbps
Output signal level: 800mVp-p ±10%
Connectors: BNC
Impedance: 75ohm
LED Indicators: Power, SFP type and SDI lock
Data rate: 2 to 3000 Mbps
Transmitter Optical Characteristics
Transmitting circuit fiber: Single Mode (9/125μm)
Light Source: DFB Laser
Optical output power: -8.2 to 2 dBm
Optical extinction ratio: 3.5 dB
Optical center wavelength 1260 to 1355 nm, 1310 typical
Spectral line width (-20dB): 1 nm
Typical link length with 9μm SMF:
@ 11.88 Gbit/s: 10km
@ 2.97 Gbit/s: 10km, 20 typical
Receiver Optical Characteristics
Transmitting circuit fiber: Single Mode (9/125μm)
Receiver Technology: PIN
Optical input overload power: 0 dBm
Optical receiver sensitivity @ 11.88Gbps
(12G-SDI, BER = 10-12, TXEXT ≥ 7dB): -14 dBm
Optical receiver sensitivity @ 2.97Gbps
(3G-SDI Checkfield, BER = 10-12, TXEXT ≥ 7dB): -17 dBm
Optical receiver sensitivity @ 1.5Gbps
(HD-SDI Checkfield, BER = 10-12, TXEXT ≥ 7dB): -18 dBm
Optical receiving window: 1260 to 1620 nm
