HUBbox NV30-R17
The HUBbox NV30-R17 Dual Optical Fiber to SDI converter supports 3G-/HD-/SDSDI and DVB/ASI, with data rates from 2Mbps to 3Gbps.
Every HUBbox™ comes equipped with AutoSFP® functionality, similar to the XFD line. This makes the HUBbox™ extremely flexible. Simply by replacing the SFP it can easily be changed into a dual receiver, dual transmitter or a transceiver. For this model, we’ve also added dual BNCs per channel to the design, allowing for dual outputs or loop-through.
It is housed in a compact and rugged aluminium case ideally suited to both studio and portable applications.
The HUBbox NV30-R17 is perfect for using with any XFD system where one or two signals are required remotely.
Find Your Sales Rep
Check the map below to see your sales representative’s contact information.
Chris Harmon
Northeast Regional Sales Manager
charmon@utsci.com
(801) 913-2512
Bob Pennington
Southeastern/Central Sales Manager
bpennington@utsci.com
(724) 880-0711
- AutoSFP® functionality
- Dual output with reclocked SDI
- Multi-rate reclocking with automatic rate detection and automatic bypass for non-SDI data rates
- Automatic Cable Equalization
- LEDs display power and SDI lock status
- Locking DC jack
- Optical LC/PC connector
- PIN receiver technology
- Typical Link lengths at 2.97Gbps:
- Up to 30km @ 9μm SMF
- Excellent performance with SDI-Checkfield test signal at SD-, HD- and 3G-SDI
- Use in conjunction with HUBbox™ NV30-T1310- T1310-05 or the XFD system for a complete fiber transmit/receive system
General Operating Conditions
Operating temperature: -4 to +131°F (-20 to +55 °C)
Supply voltage (Vcc) 11 – 27 V
Dimensions: 2.5″ x 3.3″ x 1.2″ (63.5mm x 84mm x 30mm) (excluding connectors)
Weight 0.31 lb (145g)
Electrical Characteristics
Supported standards:
– SMPTE: 292M-2008, 259M-2008, 297M-2006, 424M-2006
– DVBASI: EN50083-9
– Laser safety: Class 1 21CFR and IEC60825-1
Number of IN/OUT BNCs: 2 (transmitter input or receiver output)
Number of OUT BNCs: 2 (transmitter loop-throuh or receiver output)
Typical input cable length equalization:
– Up to 140m of Belden 1694A @ 2.97Gbps
– Up to 200m of Belden 1694A @1.485Gbps
– Up to 400m of Belden 1694A @270Mbps
Output signal level: 800mVp-p ±10%
Connectors: BNC
Impedance: 75ohm
Return loss: ≥15 dB [5-1485 MHz], ≥10dB [1485-2970MHz]
LED Indicators: Power, SFP type and SDI lock
Data rate: 2 to 3000 Mbps
Receiver Optical Characteristics
Transmitting circuit fiber: Single Mode (9/125μm), Multi Mode compatible
Receiver technology: PIN
Optical input overload power: -3 dBm
Optical receiver sensitivity @ 3Gbps
(3G-SDI Checkfield, BER = 10-12, TXEXT ≥ 7dB): -20 to -19 dBm
Optical receiver sensitivity @ 1.5Gbps
(HD-SDI Checkfield, BER = 10-12, TXEXT ≥ 7dB): -22 to -20 dBm
Optical receiving window: 1260 to 1620 nm
