HubBox HB-T1310-T1310
The Utah Scientific HubBox HB-T1310-T1310 is an optical transmitter for converting dual SDI signals to optical fiber. The system supports 3G-, HD-, and SD-SDI as well as DVB/ASI, with support for data rates from 2Mbps to 3Gbps.
The HUBbox™ comes equipped with AutoSFP® functionality, similar to the XFD line. This technology makes the HUBbox™ extremely flexible. Simply by replacing the SFP it can easily be changed into a dual receiver, dual transmitter or a transceiver. We’ve also added dual BNCs per channel to the design, giving dual outputs or loop-through.
The HB-T1310-T1310 is housed in an extremely compact and rugged aluminum case, making it ideal for both studio and portable applications. The HB-T1310-T1310 is perfect for use with any Utah Scientific XFD system to drive applications requiring one or two remote signals.
Find Your Sales Rep
Check the map below to see your sales representative’s contact information.
• AutoSFP® functionality
• Loop-through output with reclocked SDI
• Multi-rate reclocking with automatic rate detection and automatic bypass for non SDI data rates
• Automatic Cable Equalization
• LEDs display power and SDI lock status
• Locking DC jack
• Optical LC/PC connector
• Delivered with 1310nm Fabry-Perot laser
• Typical Link lengths at 2.97Gbps:
– Up to 30km @ 9μm SMF
• Excellent performance with SDI-Checkfield test signal at SD-, HD- and 3G-SDI
• Use in conjunction with HUBbox™ NV30-R17-R17 or the XFD system for a complete fiber transmit/receive system
General Operating Conditions
Operating temperature: -20 to +55 °C
Supply voltage (Vcc) 11 27 V
Dimensions 63.5mm x 84mm x 30mm (excluding connectors)
Weight 145g
Electrical Characteristics
Supported standards:
– SMPTE: 292M-2008, 259M-2008, 297M-2006, 424M-2006
– DVBASI: EN50083-9
– Laser safety: Class 1 21CFR and IEC60825-1
Number of IN/OUT BNCs: 2 (transmitter input or receiver output)
Number of OUT BNCs: 2 (transmitter loop-throuh or receiver output)
Typical input cable length equalization:
– Up to 140m of Belden 1694A @ 2.97Gbps
– Up to 200m of Belden 1694A @1.485Gbps
– Up to 400m of Belden 1694A @270Mbps
Output signal level: 800mVp-p ±10%
Connectors: BNC
Impedance: 75ohm
Return loss: ≥15 dB [5-1485 MHz], ≥10dB [1485-2970MHz]
LED Indicators: Power, SFP type and SDI lock
Data rate: 2 to 3000 Mbps
Transmitter Optical Characteristics
Transmitting circuit fiber: Single Mode (9/125μm), Multi Mode compatible
Light source: Fabry-Perot laser
Optical output power: -6 to -0 dBm, -2 typical
Optical extinction ratio: 5 dB
Optical center wavelength: 1290 to 1330 nm, 1310 typical
Spectral line width 1.5 to 3 nm
Optical rise/fall time (20-80%) 115 to 135 ps
Typical link length with 9μm SMF:
@ 2.97 Gbit/s: 10 km
@ 1.485 Gbit/s: 20 km
@ 270 Mbit/s: 30 km
