HUBbox NV30-R17-R17
The HUBbox NV30-R17-R17 Dual Optical Fiber to SDI converter supports 3G-/HD-/SDSDI and DVB/ASI. Supports data rates from 2Mbps to 3Gbps.
Every HUBbox™ comes equipped with AutoSFP® functionality, similar to the XFD line. This makes the HUBbox™ extremely flexible. Simply by replacing the SFP it can easily be changed into a dual receiver, dual transmitter or a transceiver. For this model, we’ve also added dual BNCs per channel to the design, allowing for dual outputs or loop-through.
It is housed in a compact and rugged aluminium case ideally suited to both studio and portable applications.
The HUBbox NV30-R17-R17 is perfect for using with an XFD system where one or two signals are required remotely.
- AutoSFP® functionality
- Dual output with reclocked SDI
- Multi-rate reclocking with automatic rate detection and automatic bypass for non-SDI data rates
- Automatic Cable Equalization
- LEDs display power and SDI lock status
- Locking DC jack
- Optical LC/PC connector
- PIN receiver technology
- Typical Link lengths at 2.97Gbps:
- Up to 30km @ 9μm SMF
- Excellent performance with SDI-Checkfield test signal at SD-, HD- and 3G-SDI
- Use in conjunction with HUBbox™ NV30-T1310- T1310-05 or the XFD system for a complete fiber transmit/receive system
General Operating Conditions
Operating temperature: -20 to +55 °C
Supply voltage (Vcc) 11 27 V
Dimensions 63.5mm x 84mm x 30mm (excluding connectors)
Weight 145g
Electrical Characteristics
Supported standards:
– SMPTE: 292M-2008, 259M-2008, 297M-2006, 424M-2006
– DVBASI: EN50083-9
– Laser safety: Class 1 21CFR and IEC60825-1
Number of IN/OUT BNCs: 2 (transmitter input or receiver output)
Number of OUT BNCs: 2 (transmitter loop-throuh or receiver output)
Typical input cable length equalization:
– Up to 140m of Belden 1694A @ 2.97Gbps
– Up to 200m of Belden 1694A @1.485Gbps
– Up to 400m of Belden 1694A @270Mbps
Output signal level: 800mVp-p ±10%
Connectors: BNC
Impedance: 75ohm
Return loss: ≥15 dB [5-1485 MHz], ≥10dB [1485-2970MHz]
LED Indicators: Power, SFP type and SDI lock
Data rate: 2 to 3000 Mbps
Receiver Optical Characteristics
Transmitting circuit fiber: Single Mode (9/125μm), Multi Mode compatible
Receiver technology: PIN
Optical input overload power: -3 dBm
Optical receiver sensitivity @ 3Gbps
(3G-SDI Checkfield, BER = 10-12, TXEXT ≥ 7dB): -20 to -19 dBm
Optical receiver sensitivity @ 1.5Gbps
(HD-SDI Checkfield, BER = 10-12, TXEXT ≥ 7dB): -22 to -20 dBm
Optical receiving window: 1260 to 1620 nm
