U-NET Hub
A UNET hub is used to expand the UNET bus from any SC4/400/40 controller from a single port to 8 ports. Attach one of the UNET ports on the SC4/400/40 to the 1st port on the hub and run the remaining ports of the hub to each control panel in that loop. Use the hub for connecting one panel to each port on the hub or loop through to additional panels. A 2nd UNET hub can be attached to the 1st hub for additional panels.
Find Your Sales Rep
Check the map below to see your sales representative’s contact information.
Exceptional Reliability
Linux Platform with Instant boot time
Standard GUI software Suite
Retains settings upon power restoration
Uninterrupted system operation during panel configuration
Standard SNMP monitoring support
Standard Tie-line management
Standard system salvos
Supports hundreds of control panels
Supports multiple virtual router layers
Broad range of integration for 3rd party devices
Standard redundant power supply on SC-4E and SC-400 E