VX-400/72R
The 72 x 72 Video Crosspoint card is used exclusively in the 4U 72 x 72 video routing switcher chassis in the UTAH-400 Series 2 routing switcher family. This frame provides a compact housing for any of the IO cards that comprise the UT400 Series 2 line. . The 72 x 72 video crosspoint provides switching for signals from 3 Mb/Sec to 3 Gb/Sec. It can be ordered in one of two ways: as a 121338-1 which has a local 144 x 144 crosspoint array, and as a 121338-2 that has a local 72 x 72 crosspoint array. Rectangular matrix loading is supported when a 121338-1 crosspoint is loaded in the system. This crosspoint card also houses an H.264 encoding engine that creates an RTSP video stream out of the video selected by the on-board monitor matrix. This stream can be monitored by a PC or by the LC3 control surface. The crosspoint supports control via MX bus or via Ethernet, and has a diagnostic port on the front edge for troubleshooting purposes.
Find Your Sales Rep
Check the map below to see your sales representative’s contact information.
Chris Harmon
Northeast Regional Sales Manager
charmon@utsci.com
(801) 913-2512
Bob Pennington
Southeastern/Central Sales Manager
bpennington@utsci.com
(724) 880-0711
The 72 x 72 Video Crosspoint card is used exclusively in the 4U 72 x 72 video routing switcher chassis in the UTAH-400 Series 2 routing switcher family. This frame provides a compact housing for any of the IO cards that comprise the UT400 Series 2 line. . The 72 x 72 video crosspoint provides switching for signals from 3 Mb/Sec to 3 Gb/Sec. It can be ordered in one of two ways: as a 121338-1 which has a local 144 x 144 crosspoint array, and as a 121338-2 that has a local 72 x 72 crosspoint array. Rectangular matrix loading is supported when a 121338-1 crosspoint is loaded in the system. This crosspoint card also houses an H.264 encoding engine that creates an RTSP video stream out of the video selected by the on-board monitor matrix. This stream can be monitored by a PC or by the LC3 control surface. The crosspoint supports control via MX bus or via Ethernet, and has a diagnostic port on the front edge for troubleshooting purposes.