UCP-36/E/U
With 36 buttons, the UCP-36/E is typically configured as a button-per-source panel for direct switching up to four destinations and multi-level breakaway. This panel is generally used in applications that require fast, simple access to a limited number of sources. For special applications, the UCP-36’s buttons can be programmed as source, destination, salvo, or level-select buttons. This allows the panel to be set up for any combination of 44 selections.
Find Your Sales Rep
Check the map below to see your sales representative’s contact information.
LCD Switches with High-Resolution displays
Multi-color LED illumination of buttons
Intensity adjustments for superb legibility under all lighting conditions
User configurable menu driven operation
Easy set up via Ucon software, with the ability to customize each application
8 character, alphanumeric LED status displays
Ability to restrict access to certain sources and destinations
Multi-level switching capability
Output Protect/ lock options
Flexible connection options – Ethernet, U-net or both with CAT-5 cabling
Audio attribute switching and status
Salvo Execution – making multi-bus salvos are just as easy as single source selection
Monitor matrix bus control
Connection:
(1) RJ-45: 10/100 Ethernet
(2) RJ-45: Looping U-Net
(Utah Scientific control network)
(1) 422/232: DB-9F Subminiature
Utah Scientific RCP-1 serial
protocol
(1) RJ-45: Diagnostic port
(1) RJ45: Can Exp port – panel expansion
Power:
100-240VAC 50/60Hz
Power consumption less than 15 watts
Physical Rack Mount
Width: 19” (48.26cm)
Depth: 5.5” (14cm)
Height: 1RU, 1.75” (4.45cm)
Weight: 3.5lb (1.6kg)
Operating temperature 32-104 degrees F (0-40
degrees C)
Relative humidity range: 0-90%, non-condensing
